Skip to content

Lees in het Nederlands

Amber or flashing amber: when should you stop?

Steady amber and flashing amber call for different decisions. Learn the distinction before approaching a junction to avoid an unnecessary emergency stop or an unjustified decision to continue. This is original category B practice material.

Test your knowledge

Steady amber requires stopping when reasonably possible; flashing amber warns of a dangerous point.

Step 1 — Identify the signal. At an ordinary three-color traffic light, steady amber normally appears between green and red. Flashing amber warns of a dangerous point. Also check for an authorized traffic controller (verkeersregelaar), whose instructions take precedence.

Step 2 — Steady amber: decide whether stopping is still reasonably possible. If you can stop normally and safely before your stop line (stopstreep), stop. Amber is not an invitation to accelerate. Look ahead and match your speed to visibility so that you can assess the situation in time.

Step 3 — If amber appears when you are so close that stopping is no longer reasonably possible, you may continue. This is a limited exception, not a rule for every amber light. You still need a clear and safe exit; do not block the junction.

Step 4 — Flashing amber: approach the dangerous point with caution. It grants no priority and does not by itself require a full stop at every junction. Check priority signs, shark-teeth markings (haaientanden), and other applicable rules. Yield or stop when those controls or safety require it.

Example 1 — The signal turns amber with enough distance remaining. The road is dry and a normal stop before the line is possible. Ease off and stop in a controlled way; do not try to race the red light.

Example 2 — Amber appears when you are already too close to stop reasonably. The junction and exit are clear. Continue in a controlled way rather than stopping abruptly without considering the situation or attempting to reverse.

Example 3 — An amber warning light flashes at a junction where your approach has shark teeth. Approach cautiously and yield to drivers on the crossing road. Flashing amber has not canceled the markings.

Summary — 1. Distinguish steady amber from flashing amber. 2. Stop at steady amber when reasonably possible. 3. Use the exception only when stopping is no longer reasonably possible. 4. Flashing amber calls for extra caution. 5. Keep checking priority controls and your exit.

FAQ — May I accelerate to beat an amber light? No. You must stop when that is reasonably possible; accelerating is not an application of the exception.

FAQ — Does flashing amber require everyone to stop? Not by itself. It warns of a dangerous point. A stop may still be required by another control or by the traffic situation.

FAQ — Where do I stop when there is a stop line? Before the line intended for you, whenever a stop is required. A signal pole farther ahead is not then your stopping position.

Practice question 1 — The traffic light turns amber as you approach. You can stop normally and safely before the stop line (stopstreep). What should you do? A. Continue while the light is still amber. B. Stop before the line. C. Accelerate to pass before it turns red. Check: B. Amber requires a stop when stopping is still reasonably possible. Waiting for red or accelerating misuses the exception, which applies only when stopping is no longer reasonably possible.

Practice question 2 — The light turns amber when you are so close that stopping is no longer reasonably possible. The junction and your exit are clear. What does the amber-light rule allow? A. Continue in a controlled way. B. Stop abruptly regardless of the risk. C. Continue because amber has the same meaning as green. Check: A. Article 68 provides an amber-light exception when stopping is no longer reasonably possible. An abrupt stop regardless of risk is not required. But amber is not generally equivalent to green: when you can reasonably stop, you must stop.

Practice question 3 — Only an amber warning light is flashing at a junction. There is no traffic controller. What does this light tell you? A. You have priority over all crossing drivers. B. Use caution at a dangerous point. C. You must always come to a complete stop first. Check: B. Flashing amber warns of danger. It neither grants priority nor imposes a universal stop by itself. You must also check the applicable priority signs and traffic situation.

Continue learning — Signs & road markings; Traffic controllers & instructions; Priority & junctions; Road markings: white and yellow lines. These existing lessons are included in this lesson's internal references.

Next step — Take a mock exam (oefenexamen) and apply the same sequence: identify the signal, determine whom it applies to, and check whether you can act safely.

Test your knowledge of this lesson

Keep learning

Sources and current rules

Check current rules with official sources. ViaTheoria is not affiliated with the CBR.

Privacy · Contact